What is a pole home?
A pole home is a house whose structure is carried by large treated timber poles set into concreted holes in the ground, instead of a slab or short piles. The poles can run from the ground up to the roof, so the floors are hung off them. The same idea, lined and fitted out, is behind the shed houses and barn homes sold as kitsets.
There are two quite different things sold under the name. The classic New Zealand pole house sits on a hillside, with long poles reaching down the slope so the house needs little digging. The newer pole-shed home is a farm-shed-style building on flat rural land, with a simple monopitch or gable roof, lined and insulated to be lived in.
How much does a pole home cost to build in NZ?
One NZ designer-builder that publishes its pole-shed home prices quotes a build rate of $2,100 to $3,200 per square metre, with complete design-and-build packages from $290,000 including GST. That compares with a national average of $3,229 per square metre for all new homes consented in Q1 2026, building only, with no land.
The published price from RW Architectural Design includes architectural plans, engineering and geotech, building consent and code compliance certificate fees, a standard earthworks allowance and service connections to 10 m from the building. It leaves out decks, driveways, landscaping, resource consent, on-site stormwater and wastewater, poor ground, and very high wind zones. On a rural section those exclusions can be large.
A steep-site pole house is different. Long poles, a crane or drilling rig on a slope, and specific engineering push the cost up, so treat the flat-site shed-home rate as a floor, not a guide, for a hillside house.
What does a 150 m² pole home cost? A worked example
At the published $2,100 to $3,200 per square metre, a 150 m² pole-shed home is about $315,000 to $480,000 of building work. The same 150 m² at the Q1 2026 national average of $3,229 per square metre is about $484,000. Add land, the driveway, septic tank or wastewater system, water supply, power to the house, and a contingency.
The cheaper end of that range comes from simple shapes: one roof plane, a garage bay or two that spreads the cost over more floor area, and standard sheet cladding. Every corner, deck and change of level moves it up. Our build budget calculator adds the lines the per-square-metre figure leaves out.
Does a pole home need building consent?
Yes. A pole home is a house, and a house needs building consent from the council where it will stand. The consent exemption you will see advertised for pole sheds covers single-storey farm sheds and hay barns of up to 110 m² in rural zones, and only buildings that are not lived in.
The government's guidance on that exemption sets tight limits even for sheds: one storey, a floor no more than 1 m above the ground, no more than 4 m high above the floor, a net floor area of 110 m² or less, an unsupported roof span of no more than 6 m, a rural zone, and a wind zone within the stated limit. A Chartered Professional Engineer has to design or review it, or a Licensed Building Practitioner has to design and build it.
The separate granny flat exemption, in force since 15 January 2026, lets a single-storey standalone home of up to 70 m² go without building consent if it meets every condition. Our granny flat guide goes through them one by one.
Can I build a consent-exempt pole shed and live in it later?
Not without going back to the council. Turning a shed into a home is a change of use under the Building Act, and you have to tell the council before you do it. It will want the building to meet the rules for a home, which means insulation, weathertightness, fire safety, sanitation and ventilation, and usually a building consent for the work to get it there.
A farm shed built under the exemption was designed for a lower standard of use than a house. Floors, bracing and foundations sized for hay bales and machinery are not automatically right for bedrooms. If living in it is the plan, consent it as a home from the start. It costs less than retrofitting.
Why build on poles on a steep section?
Because the poles do the work that digging and retaining walls would otherwise do. Each pole goes into its own drilled hole, so the hillside stays largely where it is, the house can sit above the slope and the view, and there is less spoil to cart away. On a steep site, foundations can cost more than the house.
What timber treatment do the poles need?
Poles and piles that hold up a house and go into the ground need timber treated to hazard class H5 under NZS 3640, the class for in-ground timber where failure would be serious. Fence posts are H4. Ask your builder to show you the treatment brand on the poles before they go in.
Who designs a pole home?
Usually an architect or architectural designer working with a structural engineer. Poles set in the ground and carrying the whole building generally fall outside the standard timber-framing tables builders use for ordinary houses, so the poles, their depth and the bracing are engineered for your site, soil and wind zone.
Building or supervising the structure of a house is restricted building work, so a Licensed Building Practitioner has to do it or oversee it, as on any other new home.
What should I compare between pole home quotes?
The all-in price on your section, not the starting price. Check what the earthworks allowance covers, whether engineering, geotech and consent fees are in or out, the wind zone the price assumes, how wastewater and stormwater are handled, who the Licensed Building Practitioner is, and whether a 10-year build guarantee is offered on your job.
Sources
- RW Architectural Design, Pole shed homes: published prices and inclusions (read 30 October 2026)
- MBIE building.govt.nz, Single-storey pole sheds and hay barns in rural zones (exemption conditions)
- Building (Exempt Building Work) Order 2020
- Stats NZ building consent data, analysed by interest.co.nz (Q1 2026, read 16 September 2026)